TIME SYNCHRONIZATION UNIT

with

 GPS / DCF Radio Receiver Unit

 

MASTER CLOCKS

Receiver

Are you keeping in touch with the pulse of time ? The GPS / DCF radio units picks it up for you world-wide, they receive radio time signals with atomic clock precision. Apart from the global time base, the changeover between summer time and winter time can also be handled. Use state of the art technology to your advantage.

 

The DCF 77 signal transmitter on frequency 77,5 kHz is located in Mainflingen near Frankfurt /Germany, signal has a long time stability of 1x10-12 = ±3x10-5 sec/year.. , The time information transmitted from the atomic clock has a range of some 2000 km. Depending on location of the clock installation and the local reception conditions , we use the most appropriate receiver for the case.

 

This GPS receiver is a self contained antenna receiver with RS422 interface and TSIP protocol, designed as a zero maintenance unit, mounted in a sealed white polycarbonate housing for weather-proof outdoor use. The GPS satellite system is working world-wide as a high accurate radio time base for automatic time setting, its time accuracy is UTC ±1 µs after 2 to 3 minutes of satellite transmitter lock-on.

Control Unit

No need to set time and date ever again. That is no longer a dream. Models HN 425 R control synchronization lines. Installation and maintenance costs are thereby considerable reduced. Evidently, equipment driven by control clock operates with radio controlled precision. Proven SWISS quality.

 

 Master clock with serial, second and minute impulse output interfaces for the synchronization of any equipment.  Construction as a 19“ rack module 3U x 28T . Power supply is from the mains or with 24 VDC. The clock is also available for supply of 48/60 VDC.